In this tutorial, you will learn how to install the Rclone software to your Raspberry Pi. Rclone allows you to clone files from the majority of cloud providers easily. You can even use the software to mount your cloud drives as if it was a locally connected disk.
This project will show you how to use Syncthing on your Raspberry Pi to synchronize files between multiple devices with ease. Syncthing allows you to replicate files to all of your other devices in real-time without relying on a 3rd party server to store the files.
In this Raspberry Pi guide, we will show you how to use Log2RAM to improve your SD Cards lifespan. As the flash memory used in SD cards only has a finite amount of writes before it dies, it can be helpful to move your log files from the SD card to RAM.
In this project, you will be learning how to set up your Raspberry Pi as an MQTT broker. We achieve this by installing the free and open-source Mosquitto software. Mosquitto allows our Raspberry Pi to act as an MQTT server without draining its limited resources.
In this project, we are going to show you how to install and use the Django framework on the Raspberry Pi. Django allows you to build a dynamic website using the Python programming language with ease. Apache works as the interface between Python and the web.
This guide will teach you how to set up an NFS Client on your Raspberry Pi using straightforward steps. Setting up the client will allow you to connect to NFS shares on your network easily. NFS is a protocol that is commonly used to share files across a network.
This guide will teach you how to set up and install AdGuard Home on your Raspberry Pi. This software allows you to quickly set up a network-wide adblocker with just a couple of commands. By acting as a DNS, AdGuard Home can filter out ads from ever loading.
In this project, we will show you the straightforward steps to setting up your Raspberry Pi as an AirPrint server. Using this, you can easily extend your older printers’ functionality to allow easy printing from Apple made devices such as the iPhone or the iPad.
In this guide, we will be teaching you how to install and configure qBittorrent on the Raspberry Pi. qBittorrent is one of the best torrent clients available for the device, featuring an easy-to-use web interface and a useful desktop client while also being lightweight.
In this guide, you will be learning how to install and setup OSMC. OSMC is a fast Kodi distribution for single-board computers such as the Raspberry Pi. It is one of the perfect ways of turning your device into a capable media center.
In this tutorial, we take you through the straightforward steps of installing and setting up Kodi on the Raspberry Pi. Using these steps, you can install Kodi on a standard operating system without relying on a third-party distribution such as OSMC or LibreELEC.
In this Raspberry Pi project, we will be walking you through installing the Screenly software on your Raspberry Pi. Screenly OSE is a free and open-source digital signage software for the Pi. It is fast and easily manageable through an excellent web interface.
In this Raspberry Pi project, we will be showing you how to set up UFW. UFW stands for uncomplicated firewall and is a solution for managing a firewall on your device. Using UFW, you can quickly and easily configure a firewall to protect your network interfaces.
In this tutorial, you will learn how to connect to the IPVanish VPN on your Raspberry Pi. IPVanish is a popular privacy-oriented VPN service. It is one of the most popular services around that boasts a zero-log policy and no data constraints.
In this guide we will be showing you how to enable support for the SPI protocol on your Raspberry Pi. SPI is a synchronous serial interface for communicating with other devices. You can send and read data from the connected devices.
In this guide, you will be learning how to configure your Raspberry Pi to connect to devices over the I2C interface. The I2C interface is a unique method for two chips to be able to communicate with each other synchronously.
In this guide, you will learn how to set up the Surfshark VPN on your Raspberry Pi. Surfshark is a relatively new VPN that has quickly risen in popularity. It boasts both strong privacy and security without having to sacrifice speed.
In this project, we will be showing you how to set up the WireGuard VPN software on the Raspberry Pi. WireGuard is a relatively new VPN technology that is aimed at replacing the aging OpenVPN with a slimmer and faster codebase.
In this tutorial, we will be showing you how to add wake word detection to your Raspberry Pi by using the Porcupine software. Porcupine is a lightweight and accurate wake word engine that was developed by AI company Picovoice.
In this Raspberry Pi project, we will be showing you how to get Android to run on its hardware by making use of LineageOS. We will be using a specially modified version of LineageOS that features a custom kernel for the Pi’s hardware.